Beer Can Chicken Bbq Recipes

BEER CAN CHICKEN

Steps:

• Preheat an outdoor grill for medium-high heat, about 375 degrees F (190 degrees C). Mix the brown sugar, chili powder, paprika, dry mustard, salt, and ground black pepper in a small bowl. Place the half-full can of beer in the center of a plate.
• Rinse chicken under cold running water. Discard giblets and neck from chicken; drain and pat dry. Fit whole chicken over the can of beer with the legs on the bottom; keep upright. Sprinkle 1 teaspoon of the seasoning mix into the top cavity of the chicken. The beer may foam up when the seasonings fall inside the can. Rub the remaining seasoning mix over the entire surface of the chicken.
• Place the chicken, standing on the can, directly on the preheated grill. Close the lid and barbeque the chicken until no longer pink at the bone and the juices run clear, about 1 hour 15 minutes. An instant-read thermometer inserted into the thickest part of the thigh, near the bone should read 180 degrees F (82 degrees C). Remove the chicken from the grill and discard the beer can. Cover the chicken with a doubled sheet of aluminum foil, and allow to rest in a warm area for 10 minutes before slicing.

BBQ BEER CAN CHICKEN

Steps:

• Soak wood chips in water for at least 1 hour.
• Preheat an outdoor grill for indirect medium heat, about 350 degrees F (175 degrees C).
• Mix together dark brown sugar, kosher salt, paprika, ground black pepper, and cayenne pepper in a small bowl. Place two half full cans of beer on a baking sheet. Spoon 1 teaspoon seasoning mix into each can. Be careful, this will make the beer foam up and out of the can.
• Rinse chicken under cold running water. Discard giblets and neck from chicken; drain and pat dry. Rub each chicken with 2 tablespoons vegetable oil. Rub the remaining seasoning mix over the entire chicken, inside and out. Fit each chicken over a can of beer with the legs on the bottom; keep upright.
• Drain the wood chips and place them with the coals or in an aluminum pan on or under the grill grate as directed by the grill's manual. Place the two chickens, standing on their cans directly on the grill. Close the lid and barbeque the chicken until no longer pink at the bone and the juices run clear, about 1 hour 30 minutes. An instant-read thermometer inserted into the thickest part of the thigh, near the bone should read 180 degrees F (82 degrees C). Remove the chickens from the grill and discard the beer cans. Cover the chicken with a doubled sheet of aluminum foil, and allow to rest in a warm area for 10 minutes before slicing.

BARBECUE BEER CAN CHICKEN RECIPE BY TASTY

Steps:

• In a medium bowl, add the brown sugar, onion powder, garlic powder, mustard powder, smoked paprika, pepper, tarragon, and salt and stir to combine. Use half of the spice rub to season the entire chicken. Cover with plastic wrap and refrigerate for at least 2 hours or up to overnight.
• Preheat the grill to 350°F (190°C).
• Remove the chicken from the fridge and season with the remaining spice rub. our out half the can of beer. Place the half-filled can in the chicken cavity and stand it upright.
• Grill the chicken over indirect heat for 30-40 minutes. Baste the chicken with barbecue sauce and cook for another 10-15 minutes, until the internal temperature reaches 165°F (75°C).
• Remove chicken from the grill and let rest for 15 minutes before carving.
• Enjoy!

BBQ BEER-CAN CHICKEN

Steps:

• Prepare grill for indirect cooking over medium heat.
• Combine seasonings in small mixing bowl and mix well.
• In large mixing bowl, combine vegetables, oil and ½ tablespoon (7 mL) of the seasoning; toss to coat.
• Trim excess fat from chicken, if necessary. Sprinkle remaining seasoning all over chicken.
• Pour out or drink about one-fourth of the beer. Place beer can in can holder (if using) in the BBQ Roasting Pan & Can Holder, if using. Place chicken over can holder so that the can is upright in the cavity of the chicken. If not using the beer can holder, simply shove the chicken cavity over the beer can and prop upright using its legs to create a tripod effect. Arrange vegetables around chicken.
• Place roasting pan on grid of grill. Grill, covered, 65-75 minutes or until thermometer registers 165°F (74°C) in thickest part of breast, rotating pan once during grilling. NOTE: if necessary when using charcoal, add 12 new coals on each side of grill after 30 minutes.
• Remove roasting pan from grill. Carefully remove chicken from can holder.
• Discard canned beverage and serve chicken with vegetables.

BEER CAN CHICKEN

Steps:

• Remove neck and giblets from chicken and discard. Rinse chicken inside and out, and pat dry with paper towels. Rub chicken lightly with oil then rub inside and out with salt, pepper and dry rub. Set aside.
• Open beer can and take several gulps (make them big gulps so that the can is half full). Place beer can on a solid surface. Grabbing a chicken leg in each hand, plunk the bird cavity over the beer can. Transfer the bird-on-a-can to your grill and place in the center of the grate, balancing the bird on its 2 legs and the can like a tripod.
• Cook the chicken over medium-high, indirect heat (i.e. no coals or burners on directly under the bird), with the grill cover on, for approximately 1 1/4 hours or until the internal temperature registers 165 degrees F in the breast area and 180 degrees F in the thigh, or until the thigh juice runs clear when stabbed with a sharp knife. Remove from grill and let rest for 10 minutes before carving.

PAT'S BEER CAN GRILLED CHICKEN

Steps:

• For the chicken rub: In a small bowl mix all the ingredients together and use for the grilled chicken. You can store extra rub mixture in an airtight container for up to 6 months.
• For the chicken: Preheat your grill to medium-high heat.
• Rub the chicken and its cavity down with the vegetable oil. Season the chicken with rub mixture, remembering to season the cavity. Pour out 1/4 of the beer and sit the chicken on top of the beer can. Place the chicken in the center of the hot grill and cover. Cook the chicken for 1 to 1 1/2 hours, or until an instant-read thermometer registers 165 degrees F. Once cooked, cover loosely with foil and let rest for 10 minutes before carving.

BARBECUE BEER-CAN CHICKEN

Steps:

• Heat gas or charcoal grill for indirect cooking. Remove and discard neck and giblets from chicken cavity. Pat chicken dry with paper towels.
• In small bowl, mix paprika, salt, chili powder, coriander, cumin and pepper. Rub mixture on inside and over outside of chicken, using all of mixture. Carefully loosen skin at top of breast. Place butter evenly under skin of breast, without removing skin.
• Open beer can; with can opener, make several other openings in top. Measure out 2/3 cup beer; discard or reserve for another use. Place half-full can of beer in ungreased shallow 8x8- or 13x9-inch aluminum grill pan. Carefully place chicken cavity over can, pushing until chicken balances in pan.
• Place on grill over medium heat, making sure chicken is balanced. Cover grill; cook 1 hour to 1 hour 15 minutes or until legs move easily when twisted or lifted and thermometer inserted in thickest part of thigh reads at least 165°F. Brush chicken all over with 1/4 cup of the barbecue sauce. Cook 8 to 12 minutes longer or until skin of chicken is crisp, but not burned.
• With tongs and flat metal spatula, carefully remove chicken and can from pan on grill; place on clean cutting board or serving platter. Carefully remove pan and drippings; let cool, then discard. Let chicken stand 5 to 10 minutes. Twist can to remove from chicken; discard can. Serve carved chicken with remaining 1/4 cup barbecue sauce.
• To bake chicken, place oven rack in lowest position, and heat oven to 375°F. Place prepared chicken on can in lightly sprayed 8-inch square (2-quart) baking dish. Bake 1 hour to 1 hour 15 minutes or until legs move easily when lifted or twisted and thermometer inserted in thickest part of thigh reads at least 165°F. Brush chicken all over with 1/4 cup of the barbecue sauce. Bake 8 to 12 minutes longer or until skin of chicken is crisp, but not burned. Let chicken stand 5 to 10 minutes. Twist can to remove from chicken; discard can. Serve carved chicken with remaining 1/4 cup barbecue sauce.

BEER CAN CHICKEN

Steps:

• Light a lidded barbecue. Let the flames die down and the coals turn ashen, then mound the coal up on one side. If using a small barbecue, you will have to remove the grills and place a sturdy roasting tin on the floor of the barbecue, next to the coals - this will give you space to close the lid once the chicken is in. If you have a large barbecue, the chicken can sit directly on the grills (or on a tray on the grills, so that it doesn't topple over.)
• To make the rub, mix all the ingredients together with a good grinding of black pepper. Drizzle the chicken with the oil, sprinkle over the rub and massage it into the skin, making sure you get into all the nooks and crannies, even inside the cavity.
• Use a can opener to take off the top of the can of beer. Pour out half the beer (tip into a glass to drink!) and leave the rest in the can, as it will keep the chicken moist while it cooks. Pop the chicken onto the can, legs down, so that it looks like it is sitting upright with the can in its cavity. Stand the chicken and can upright on the barbecue, either in the roasting tin or directly on the grill, on the side with no coals. Close the lid and cook for 1 hr 20 mins until the chicken is browned, the meat tender and the juices run clear. If the juices aren't clear, cook for a further 10 mins, then check again. (To cook in the oven, heat to 200C/180C fan/gas 6. Sit the chicken on a baking tray, place in the bottom of the oven, and follow the same cooking time.)
• Remove the chicken from the barbecue, cover lightly with foil and leave to rest for 20 mins before serving.