Beer Can Chicken Rub Homemade Recipes

BEER CAN CHICKEN

Steps:

• In a small bowl, combine the first 6 ingredients. Gently loosen skin from the chicken. Brush chicken with oil. Sprinkle 1 teaspoon spice mixture into cavity. Rub the remaining spice mixture over and under the skin. Place lemon slices in neck cavity. Tuck wing tips behind the back., Prepare grill for indirect heat, using a drip pan. Pour out half the beer, reserving for another use. Poke additional holes in top of the can with a can opener. Holding the chicken with legs pointed down, lower chicken over the can so it fills the body cavity., Place chicken over drip pan; grill, covered, over indirect medium heat until a thermometer reads 180° 1-1/4 to 1-1/2 hours. Remove chicken from grill; cover and let stand for 10 minutes. Remove chicken from can.

BEER CAN CHICKEN WITH MEMPHIS RUB

Steps:

• Remove and discard the fat just inside the body cavities of the chicken. Remove the package of giblets, and set aside for another use. Rinse the chicken, inside and out, under cold running water, then drain and blot dry, inside and out, with paper towels.
• Sprinkle 1 tablespoon of the rub inside the body and neck cavities, then rub another 1 tablespoon all over the skin of the bird. If you wish, rub another 1/2 tablespoon of the mixture between the flesh and the skin. Cover and refrigerate the chicken while you preheat the grill.
• Set up the grill for indirect grilling (see instructions below) placing a drip pan in the center. If using a charcoal grill, preheat it to medium.
• If using a gas grill, place all the wood chips in the smoker box and preheat the grill to high; then, when smoke appears, lower the heat to medium.
• Pop the tab on the beer can. Using a "church key" style can opener, make 6 or 7 holes in the top of the can. Pour out the top inch of beer, then spoon the remaining dry rub through the holes into the beer. Holding the chicken upright, with the opening of the body cavity down, insert the beer can into the cavity. (Caution: the beer fizzes when you add the rub!).
• When ready to cook, if using charcoal, toss half the wood chips on the coals. Oil the grill grate. Stand the chicken up in the center of the hot grate, over the drip pan. Spread out the legs to form a sort of tripod, to support the bird.
• Cover the grill and cook the chicken until fall-off-the-bone tender, 2 hours. If using charcoal, add 10 to 12 fresh coals per side and the remaining wood chips after 1 hour.
• Using tongs, lift the bird to a cutting board or platter, holding the metal spatula underneath the beer can for support. (Have the board or platter right next to the bird to make the move shorter. Be careful not to spill hot beer on yourself.) Let stand for 5 minutes before carving the meat off the upright carcass. (Toss the beer can out along with the carcass.).
• Memphis Rub:.
• Combine all the ingredients in a jar, twist the lid on airtight, and shake to mix. Store away from heat or light for up to six months. Makes about 1/2 cup. Enough for 4 to 6 racks of ribs.
• ** Indirect grilling on a Charcoal Grill:.
• To set up you grill for indirect grilling, light the coals. When they are blazing red, use tongs to transfer them to opposite sides of the grill, arranging them in two piles. Some grills have special half-moon-shaped baskets to hold the coals at the sides; others have wire fences that hook onto the bottom gate. Let the coals burn until they are covered with a thin layer of gray ash. Set the drip pan in the center of the grill, between the mounds of coals. Place the food on the grate over the drip pan, and cover the grill. You'll need to add about 10 to 12 fresh briquettes to each side after an hour of cooking.
• If you want to add a smoke flavor, add 1 to 2 cups of presoaked wood chips, or 2 to 4 chunks, to the coals just before you start to cook, and again whenever you replenish the coals.

TEXAS DRY RUB BEER CAN CHICKEN

Steps:

• In a small bowl combine the rub ingredients.
• Remove and discard the neck, giblets, and any excess fat from the chicken. Rinse the chicken, inside and out, under cold water and pat dry with paper towels. Lightly spray or brush all over with the vegetable oil and season, inside and out, with the rub. Let rest at room temperature while you preheat your grill.
• Open the beer can an pour off half of the beer. (Or drink it if you don't want to waste it.) Set the half-full can of beer in can holder (or if you don't have a can holder, just be extra careful and place the can on a flat smooth surface), and add fresh rosemary leaves, minced shallot and lemon juice. This will help add moisture and flavor from the inside as your chicken cooks. You may need to use a funnel, to help add the ingredients to the can.
• Slide the chicken over the top so the can fits inside the cavity. Transfer the bird to your preheated grill, while carefully keeping the can upright. Carefully balance the bird on its two legs and the can holder. (If can holder is not used just use the can and use the legs like a tripod.) Grill over Indirect Medium heat until the juices run clear and the internal temperature reaches 170 F in the breast and 180 F in the thickest part of the thigh. 1 - 1/4 to 1 - 1/2 hours. Wearing barbecue mitts, carefully remove the chicken and the can (holder) from the grill. Do not spill the beer, it will be HOT. Let the chicken rest for about 10 minutes before lifting it from the can (holder). Discard the beer. Cut the chicken into serving pieces. Serve warm.
• ENJOY!

PAT'S BEER CAN GRILLED CHICKEN

Steps:

• For the chicken rub: In a small bowl mix all the ingredients together and use for the grilled chicken. You can store extra rub mixture in an airtight container for up to 6 months.
• For the chicken: Preheat your grill to medium-high heat.
• Rub the chicken and its cavity down with the vegetable oil. Season the chicken with rub mixture, remembering to season the cavity. Pour out 1/4 of the beer and sit the chicken on top of the beer can. Place the chicken in the center of the hot grill and cover. Cook the chicken for 1 to 1 1/2 hours, or until an instant-read thermometer registers 165 degrees F. Once cooked, cover loosely with foil and let rest for 10 minutes before carving.

BEER CAN CHICKEN

Steps:

• Remove neck and giblets from chicken and discard. Rinse chicken inside and out, and pat dry with paper towels. Rub chicken lightly with oil then rub inside and out with salt, pepper and dry rub. Set aside.
• Open beer can and take several gulps (make them big gulps so that the can is half full). Place beer can on a solid surface. Grabbing a chicken leg in each hand, plunk the bird cavity over the beer can. Transfer the bird-on-a-can to your grill and place in the center of the grate, balancing the bird on its 2 legs and the can like a tripod.
• Cook the chicken over medium-high, indirect heat (i.e. no coals or burners on directly under the bird), with the grill cover on, for approximately 1 1/4 hours or until the internal temperature registers 165 degrees F in the breast area and 180 degrees F in the thigh, or until the thigh juice runs clear when stabbed with a sharp knife. Remove from grill and let rest for 10 minutes before carving.

SPICE RUBBED BEER CAN CHICKEN

Steps:

• Heat a gas or charcoal grill with a lid big enough to accommodate the bird. Put a drip pan below the grates.
• Mix the ingredients for the Spice Rub until they are well blended. (This will keep, covered, in the refrigerator for 1 week.) Rub it all over the chicken, inside and out.
• Open the beer and take a big swig or just pour out a couple of ounces. Sit the chicken on the beer can so the legs are at the bottom and the wings are at the top. Stand the beer can on the grates over the drip pan. Put the cover on and cook over indirect heat until the juices run clear, about 1 hour. (If using charcoal, push the coals to 1 side so the chicken is not over direct heat.)
• Note: This chicken can also be cooked in a 350 degrees F oven. Just stand the beer can in a shallow roasting pan and cook about 1 hour or until juices run clear.

BEER CAN CHICKEN

Steps:

• Prepare a kettle grill with charcoal off to one side for indirect grilling and add the soaked apple wood or mesquite wood chips over the coals. Remove the neck and giblets and pat the chicken dry with paper towels. Brush chicken all over with oil and sprinkle with salt and pepper and 3 tablespoons dry rub. Set aside.
• Open the beer can, pour out about 1/2 cup of the beer into a cup and drink it (or pour it over the wood chips). Make an extra hole in the top of the can with a church-key can opener. Add the remaining 1 tablespoon dry rub to the beer can (it might fizz up a little bit at the top, but don't worry, that is normal), the garlic and rosemary.
• Hold the chicken above the can of beer and slide the chicken over the can. Fold the wings back behind the chicken. Make sure the legs are in front of the can, supporting the chicken. Place the chicken inside a disposable pan.
• Place the pan on the grates of the grill on the opposite side of the charcoals, put lid on and cook the chicken until golden brown and the internal temperature registers 160 degrees F in the breast area and 175 degrees F in the thigh area on an instant-read thermometer, 1 to 1 1/2 hours. Remove from the grill (be careful not to spill the contents of the beer can as it will be very hot) and let rest for 10 minutes before carving.
• Use a pair of locking tongs and grab the bottom of the beer can to remove from the chicken cavity. Place on a platter or cutting board to rest and cool. Carve and serve.

BBQ BEER CAN CHICKEN

Steps:

• Soak wood chips in water for at least 1 hour.
• Preheat an outdoor grill for indirect medium heat, about 350 degrees F (175 degrees C).
• Mix together dark brown sugar, kosher salt, paprika, ground black pepper, and cayenne pepper in a small bowl. Place two half full cans of beer on a baking sheet. Spoon 1 teaspoon seasoning mix into each can. Be careful, this will make the beer foam up and out of the can.
• Rinse chicken under cold running water. Discard giblets and neck from chicken; drain and pat dry. Rub each chicken with 2 tablespoons vegetable oil. Rub the remaining seasoning mix over the entire chicken, inside and out. Fit each chicken over a can of beer with the legs on the bottom; keep upright.
• Drain the wood chips and place them with the coals or in an aluminum pan on or under the grill grate as directed by the grill's manual. Place the two chickens, standing on their cans directly on the grill. Close the lid and barbeque the chicken until no longer pink at the bone and the juices run clear, about 1 hour 30 minutes. An instant-read thermometer inserted into the thickest part of the thigh, near the bone should read 180 degrees F (82 degrees C). Remove the chickens from the grill and discard the beer cans. Cover the chicken with a doubled sheet of aluminum foil, and allow to rest in a warm area for 10 minutes before slicing.

BEER CAN CHICKEN

Steps:

• Preheat an outdoor grill for medium-high heat, about 375 degrees F (190 degrees C). Mix the brown sugar, chili powder, paprika, dry mustard, salt, and ground black pepper in a small bowl. Place the half-full can of beer in the center of a plate.
• Rinse chicken under cold running water. Discard giblets and neck from chicken; drain and pat dry. Fit whole chicken over the can of beer with the legs on the bottom; keep upright. Sprinkle 1 teaspoon of the seasoning mix into the top cavity of the chicken. The beer may foam up when the seasonings fall inside the can. Rub the remaining seasoning mix over the entire surface of the chicken.
• Place the chicken, standing on the can, directly on the preheated grill. Close the lid and barbeque the chicken until no longer pink at the bone and the juices run clear, about 1 hour 15 minutes. An instant-read thermometer inserted into the thickest part of the thigh, near the bone should read 180 degrees F (82 degrees C). Remove the chicken from the grill and discard the beer can. Cover the chicken with a doubled sheet of aluminum foil, and allow to rest in a warm area for 10 minutes before slicing.

BAKED BEER CAN CHICKEN

Steps:

• Preheat oven to 350 degrees F (175 degrees C).
• Mix the garlic powder, seasoned salt, onion powder, dried oregano, salt, and ground black pepper in a small bowl; set aside. Pour 1/3 of one can of beer into the bottom of a 9x13-inch baking dish. Place the open beer can in the center of the baking dish.
• Rinse chicken under cold running water. Discard giblets and neck from chicken; drain and pat dry. Fit whole chicken over the open beer can with the legs on the bottom. With the breast of the chicken facing you, use a paring knife to cut a small slit on each side and press the tip of each wing into the slit to encourage even cooking.
• Rub the prepared seasoning mixture to taste over the entire chicken. Pat the sliced green onions around the whole chicken evenly. Some will fall into the beer, that's fine. Press the halved green onions into the top cavity of the chicken. Open the remaining beer and pour 1/2 of it into the pan under then chicken. Reserve the remaining beer.
• Bake the chicken in the preheated oven. After 45 minutes, pour remaining beer into the pan under the chicken. Continue baking until no longer pink at the bone and the juices run clear, about 30 additional minutes. An instant-read thermometer inserted into the thickest part of the thigh, near the bone should read 180 degrees F (82 degrees C). Remove the chicken from the oven and discard the beer can. Cover the chicken with a doubled sheet of aluminum foil, and allow to rest in a warm area for 10 minutes before slicing.

ULTIMATE BEER BUTT CHICKEN BEER CAN

Steps:

• Rinse chicken well inside an out.
• Pat bird completely dry with paper towels.
• To make the rub: mix 4 tbsp paprika, 2 tsp salt, 2 tbsp black pepper, 2 tsp cayenne pepper, and 1/4 cup brown sugar in a small bowl and set it aside.
• To make glaze: mix together 1/4 cup brown sugar, 4 tbsp ketchup, 3 tsp frank's red hot sauce, 4 tbsp white vinegar, 4 tbsp beer (save remainder in can and set it aside), and 2 tbsp of the spice rub you just made in a separate bowl; set aside.
• Pour beer can out (or drink it down) until it is just a bit over half way full and then add crushed bay leaves and 1 tsp of rub to the half full can.
• Loosen the skin on the breasts, legs and thighs of your chicken.
• Massage the rub into the meat under the skin and then all over the outside of the bird's skin as well as inside the cavity.
• Place beer can in the "butt" of the bird making the bird stand upright.
• Preheat grill with all burners on high until grill is heated and ready to cook.
• You must cook indirectly; so if you have 2 burners on your grill, turn one off (for 3 burners turn 1 off, for 4 burners turn 2 off, etc.).
• Place the standing bird on the cooler or "off" burner side of the grill with the breasts facing the hot or "on side of it (you grill should remain at about 375 degrees during the entire cooking process).
• Close lid and cook for 30 minutes, then rotate bird so that the opposite side (the back) is not facing the heated side of the grill and then continue cooking with the lid closed for 30 more minutes.
• Rotate bird back to original position with breasts facing the heat and glaze the entire bird thoroughly with the pre-made glaze; continue cooking 30 more minutes until cooked, brown and slightly crisped.
• Transfer chicken carefully off of beer can and onto cutting board.
• Let rest 5-10 minutes and then carve and enjoy!

BEER-CAN CHICKEN

Steps:

• Pour out (or drink) half of beer.
• Prepare grill for high, indirect heat and fit with grill pan (for a charcoal grill, bank coals on 1 side of grill and put drip pan on empty side; for a gas grill, leave 1 burner turned off and place drip pan over unlit burner). Add water to pan to a depth of 1/2".
• Season chicken with 4-3-2-1 Spice Rub. Place cavity of chicken, legs pointing down, onto open can so that it supports chicken upright. Place can, with chicken, on grill over indirect heat (and above drip pan). Grill chicken, covered, until cooked through and an instant-read thermometer inserted into the thickest part of thigh registers 165°F, 45-60 minutes. (If using charcoal, you may need to add more to maintain heat.) Let chicken rest 10 minutes before carving. Serve with pan drippings.

BARBECUE RUB FOR BEER CAN CHICKEN

Steps:

• Combine all ingredients and store in airtight container.

BEER CAN CHICKEN

Steps:

• Light a lidded barbecue. Let the flames die down and the coals turn ashen, then mound the coal up on one side. If using a small barbecue, you will have to remove the grills and place a sturdy roasting tin on the floor of the barbecue, next to the coals - this will give you space to close the lid once the chicken is in. If you have a large barbecue, the chicken can sit directly on the grills (or on a tray on the grills, so that it doesn't topple over.)
• To make the rub, mix all the ingredients together with a good grinding of black pepper. Drizzle the chicken with the oil, sprinkle over the rub and massage it into the skin, making sure you get into all the nooks and crannies, even inside the cavity.
• Use a can opener to take off the top of the can of beer. Pour out half the beer (tip into a glass to drink!) and leave the rest in the can, as it will keep the chicken moist while it cooks. Pop the chicken onto the can, legs down, so that it looks like it is sitting upright with the can in its cavity. Stand the chicken and can upright on the barbecue, either in the roasting tin or directly on the grill, on the side with no coals. Close the lid and cook for 1 hr 20 mins until the chicken is browned, the meat tender and the juices run clear. If the juices aren't clear, cook for a further 10 mins, then check again. (To cook in the oven, heat to 200C/180C fan/gas 6. Sit the chicken on a baking tray, place in the bottom of the oven, and follow the same cooking time.)
• Remove the chicken from the barbecue, cover lightly with foil and leave to rest for 20 mins before serving.

BEER CAN CHICKEN W/DIRTY BIRD RUB

Steps:

• Brush chicken with olive oil.
• Rub chicken with the rub.
• Insert beer in cavity of chicken.
• Grill until chicken is done.