Easy Donut Holes Recipe Recipe For Chicken

DONUT HOLES (FRIED, NO YEAST)

Steps:

• I find my oil takes about 20 minutes or longer to come to temperature, so I typically start the oil just before I start my donuts. Fill a medium-sized, heavy-bottomed saucepan 2-3 inches (5-7cm) deep with your oil over medium heat. Use a candy or frying thermometer (make sure it isn't touching the bottom of the pot) to monitor your temperature and heat oil to 350F (175C). Monitor the heat pretty regularly and note that you may need to increase/decrease your stove temperature to keep it consistent.
• Combine flour, sugar, baking powder and salt in a large bowl and whisk until well-combined.
• Use a box grater go grate the butter into small pieces and then add to the flour mixture and stir until well-incorporated (visible butter pieces will still remain). Note: If you do not have a box-grater, use a pastry cutter to cut the butter into the dry ingredients until the mixture resembles coarse crumbs, instead.
• Add milk and gently stir until all ingredients are combined and the dough clings together.
• Transfer dough onto a well-floured surface, and knead gently until it forms a cohesive ball. If dough is too sticky to manage, continue to work in flour until it is smooth and manageable (I've found on hot days or if my butter isn't cold enough the dough can be quite sticky)
• Portion off approximately 1 ½ Tbsp-sized pieces of dough and roll into smooth, tight balls. Set aside.
• Prepare your cinnamon/sugar mixture for rolling by stirring together cinnamon and sugar in a small dish. Set aside.
• Prepare a large plate or baking sheet for your cooked donut holes by lining generously with paper towels.
• Once oil has reached 350F, very carefully fry your donut holes, only 2-3 at a time, carefully transferring them to the oil with a slotted spoon (don't drop them in or the oil may splash, lower them into the oil instead).
• Fry donut holes for approximately 90 seconds*, turning half way through so they become evenly golden brown.
• Remove carefully with a slotted spoon, and place donut holes on a paper towel laden plate. Allow them to sit for about a minute/until no longer too hot to touch, and then transfer them to your cinnamon/sugar dish, roll them in the mixture until fully covered. Make sure to allow your oil to return to 350F (175C) between batches.
• Repeat until all donut holes are cooked and have been rolled in cinnamon sugar.

EASY HOMEMADE GLAZED DOUGHNUT HOLES

Steps:

• Sift the confectioners' sugar into a medium bowl. Slowly stir in 3 tablespoons of milk and the vanilla extract until the mixture is smooth. If the glaze isn't thin enough, stir in 1 additional tablespoon of milk. Cover the glaze with plastic wrap and set it aside while you make the doughnut holes.
• Add the vegetable oil to a large, heavy-bottomed pot. (There should be at least 2 inches of oil in the pot and at least 2 inches between the top of the oil and the top of the pot.) Attach the deep-fry thermometer to the pot and begin heating the oil over medium heat to 350ºF. Line a baking sheet with paper towels.
• In a small bowl, whisk together the milk and the egg.
• In a separate medium bowl, whisk together the flour, sugar, baking powder and salt. Stir the milk-egg mixture into the dry ingredients, then stir in the melted butter, mixing until a soft dough forms.
• Once the oil has reached 350ºF, use a small ice cream scoop to drop about 1 tablespoon scoops of dough into the oil, careful not to overcrowd the pan. (See Kelly's Notes.) Fry the doughnut holes, flipping them in the oil, for about 2 minutes or until they're golden brown. Using a slotted spoon, transfer the doughnut holes to the paper towel-lined baking sheet.
• Allow the doughnut holes to cool slightly. Place a cooling rack atop a baking sheet, then one by one, dip the doughnut holes into the glaze and transfer them to the rack to allow the excess glaze to drip off. Serve immediately.
• The dough expands when fried, so 1 tablespoon of batter will yield about a 2-inch doughnut hole. If you prefer smaller doughnut holes, drop about 1 teaspoon of batter into the oil. This recipe yields about 2 dozen of the larger doughnut holes or 4 dozen of the smaller variety.
• The roundness of the doughnut holes depends on how clean of a scoop of batter you drop into the hot oil. If you don't have a small ice cream scoop, you can use two small spoons to form the batter into mounds, however your doughnut holes will not be as uniformly round in shape.
• ★ Did you make this recipe? Don't forget to give it a star rating below!

FUNFETTI® DONUT HOLES

Steps:

• Whisk confectioners' sugar, 1/4 cup sprinkles, 3 tablespoons milk, lemon juice, 1 teaspoon vanilla extract, and 1 pinch salt together in a bowl to make a smooth glaze.
• Whisk flour, brown sugar, baking powder, and 3/4 teaspoon salt together in a large bowl.
• Combine 1 cup milk, egg, and 1 teaspoon vanilla extract in a small bowl. Stir into the flour mixture. Add melted butter and 1/4 cup sprinkles; mix until a soft dough forms.
• Heat at least 2 inches of oil in a large pot to 350 degrees F (175 degrees C). Line a baking sheet or wire rack with paper towels.
• Scoop a few tablespoons of dough into the hot oil using a small ice cream scoop. Fry donut holes until golden brown, about 1 minute per side. Transfer donut holes to the paper towels using a slotted spoon; let drain and cool slightly. Repeat with remaining dough.
• Place a wire rack on a baking sheet. Dip one donut hole at a time into the glaze and place on the wire rack; allow excess glaze to drip off before serving.