Bear Cake Recipes

BROWN BEAR CAKE

Steps:

• Prepare cake mixes according to package directions. Pour 3 cups batter into a greased and floured 2-qt. round baking dish. Pour 1-1/2 cups batter into a greased and floured 1-qt. ovenproof bowl. Using remaining batter, fill six greased jumbo muffin cups and four greased regular muffin cups two-thirds full., Bake cupcakes for 18-20 minutes and cakes for 40-45 minutes at 350° or until a toothpick inserted in the center comes out clean. Cool cupcakes for 5 minutes and cakes for 10 minutes before removing from pans to wire racks to cool completely., Level the top of the cakes, four jumbo cupcakes and two regular cupcakes. (Save the remaining cupcakes for another use.) Place large cake top side down on an 18x12-in. covered board. For teddy bear's head, place the small cake top side down above large cake. Position jumbo cupcake cut side up for arms and legs. Place regular cupcakes on top of head for ears., In a large bowl, beat the cream cheese and butter until smooth. Add the confectioners' sugar, cocoa and milk; beat until smooth. Frost tops and sides of cakes and cupcakes. Tint 2-1/4 cups coconut dark brown; tint remaining coconut light brown., Sprinkle dark brown coconut over arms and legs. Leaving a 4-in. circle in center of bear's body, sprinkle dark brown coconut in a 1-in. circle around edge of cake. Sprinkle dark brown coconut in a 1/2-in. circle around edges of the head and ears. Press dark brown coconut into the sides of the body, head and ears. Sprinkle light brown coconut over the middle of the body, head and ears., Position one peppermint patty on face for nose. Place one peppermint patty and four M&M's on each paw. Insert chocolate kisses point side down for eyes. Cut one licorice piece into two 2-in. strips; shape to form a mouth. Cut two licorice pieces into a 7-in. strip; place around the neck. Shape the remaining licorice into a bow; place below neck. Store in the refrigerator.

BEAR CLAWS

Steps:

• In a large bowl, dissolve yeast in warm milk. Stir in sugar, salt and egg; mix well. Add the flour all at once, stirring until mixed. Set aside., For butter mixture, sprinkle 1 tablespoon flour on a work surface; place butter on surface and sprinkle with 1 teaspoon flour. Press and roll out with a rolling pin. Scrape butter from rolling pin and continue to work the butter until it forms a smooth mass without any hard lumps. Knead in remaining flour, working quickly to keep butter cold. , Place butter mixture on a sheet of plastic wrap and shape into a small rectangle. Cover with another sheet of plastic wrap; roll into a 9x6-in. rectangle. Set aside., Turn dough onto a floured work surface; roll into a 14x10-in. rectangle, with a 10-in. side toward the bottom. Unwrap butter mixture; place on dough 1 in. above bottom edge and 1/2 in. from each side edge. Fold top half of dough over butter and pinch edges to seal., Turn dough a quarter turn to the right; sprinkle lightly with additional flour. Lightly roll into a 16x8-in. rectangle. Fold bottom third of rectangle up and top third down, as when folding a business letter, making a 5-1/2x8-in. rectangle (this is called one turn). Rotate dough a quarter turn to the right. Lightly roll into a 16x8-in. rectangle and again fold into thirds, finishing the second turn. Repeat rotating, rolling and folding two more times for a total of four times. Wrap loosely in plastic wrap; refrigerate for 30 minutes., Roll dough into a 12-in. square; cut square into three 12x4-in. strips. Spread 2 tablespoons filling down the center of each strip to within 1 in. of long edge. Fold lengthwise over filling and pinch seam to seal. Cut each strip into three pieces. With scissors, cut each piece four times from pinched seam to about 1/2 in. from folded side. Place 2 in. apart on greased baking sheets. Curve folded side slightly to separate strips and allow filling to show. Cover and let rise in a warm place until almost doubled, about 1 hour., Preheat oven to 400°. Brush bear clasws with egg. Bake 10-14 minutes or until puffy and golden brown. Remove from pans to wire racks. Combine glaze ingredients; brush over warm rolls. Cool.

BEAR CAKE

Steps:

• Place templates on sheet cakes, and cut out with a paring knife. Discard scraps. Halve snout and belly pieces horizontally, discarding bottom halves.
• Arrange pieces into a bear shape, trimming sharp edges off shoulders, ears, and paws. Use chocolate frosting to attach pieces to one another.
• Coat entire cake with frosting, rounding over the tummy and snout. Refrigerate until frosting is firm, about 30 minutes to overnight. Add a second smooth coat to snout, ears, and front paws. Fill a pastry bag fitted with a multiopening grass tip (Ateco #233) with frosting. Pipe fur on bear, skipping center of ears and front paws and entire snout, refilling bag as necessary.
• Use licorice coins for the eyes, and licorice button for the nose.

COLORADO BLACK BEAR CAKE

Steps:

• Raspberry Ice Cream:;
• Chocolate Glaze:;
• Almond Honey Brittle:;
• Preheat oven to 350 degrees F.
• Combine and sift all of the dry ingredients, whisk in the buttermilk and creme fraiche, then the butter and the eggs.
• Bake in a 10-inch cake pan for 30 minutes.
• Blend the raspberries and strain out all of the seeds. Bring the milk and sugar to a boil. Temper in the egg yolks. Remove from the heat and add the cream and raspberry puree. Spin according to ice cream machine directions.;
• Place the water and corn syrup in a pot and bring to a boil. Remove from the heat, add the chocolate and whisk until smooth.;
• Place the sugar and honey in a pot and cook until the sugar has all melted, once melted add in the butter on tablespoon at a time. Once the mixture caramelizes add the nuts and baking soda and stir. Transfer to a silpat and once cool chop into pieces
• To assemble the cake, place the cake sponge into the bottom of a ring mold and top with bits of the toffee and raspberry ice cream. Fill the ring mold with enough ice cream that only 1/4 to 1/2-inch is left at the top of the ring mold. It is preferable to allow this to set in the freezer overnight. Once set, pour the room temp chocolate glaze on top and fill the remaining 1/4 to 1/2-inch of the mold. You may decorate the cake by wrapping it in chocolate, or simply garnish with fresh raspberries.
• A viewer, who may not be a professional cook, provided this recipe. The Food Network Kitchens chefs have not tested this recipe and therefore, we cannot make representation as to the results.

GOLDY BEAR'S DREAM CAKE

Steps:

• Preheat oven to 350°F
• Grease two 9″ springform pans.
• Combine flour with 1 1/2 cups sugar, and cut in the butter until the mixture resembles coarse crumbs. Reserve two cups.
• To the remaining crumb mixture, add the first two eggs, sour cream, salt, baking powder, baking soda, and almond extract.
• Mix, and spread over the bottom and up the sides of the pans.
• Combine the cream cheese with the vanilla, the remaining eggs, and 1/2 cup sugar.
• Spread half of this mixture over the batter in each pan.
• Spread the raspberry preserves on top of the cream cheese mixture in each pan.
• Whirl the almonds in a food processor until chunky.
• Combine with the reserved crumb mixture and sprinkle over the preserves on each cake.
• Bake cakes 45 to 55 minutes, or until a toothpick tests clean.
• Cool the cakes at least half an hour before attempting to serve. Best if made the night before and refrigerated.

BEER CAKE I

Steps:

• Preheat oven to 350 degrees F (175 degrees C), grease and flour a 10 inch Bundt pan.
• Combine cake mix and pudding mix in a large bowl. Add beer and vegetable oil and mix lightly. Add 4 eggs. Beat at high speed until mixture is thick, creamy and smooth. Pour into greased and floured Bundt pan.
• Bake at 350 degrees F (175 degrees C) for 55 minutes. Cool in pan for 10 minutes, then turn out onto a wire rack and cool completely. Frost as desired.

PANDA BEAR CAKE

Steps:

• Heat oven to 350°F (325°F for dark or nonstick pans). Grease bottoms and sides of two 8-inch round cake pans and a 13x9-inch pan, or spray with baking spray with flour. In large bowl, beat 1 cake mix, 1 cup of the water, 1/2 cup of the oil and 3 eggs with electric mixer on low speed 30 seconds, then on medium speed 2 minutes, scraping bowl occasionally. Pour into round pans, dividing batter evenly. Bake as directed n box for 8-inch round pan. Cool cakes in pans 10 minutes; remove from pans to cooling racks. In large bowl, beat remaining cake mix, remaining 1 cup water, 1/2 cup oil and 3 eggs with electric mixer on low speed 30 seconds, then on medium speed 2 minutes, stirring occasionally. Pour into 13x9-inch pan. Bake as directed on box for 13x9-inch pan. Cool cake 10 minutes; remove from pan to cooling rack. Cool completely, about 1 hour. For easier handling, refrigerate or freeze cakes about 1 hour or until firm.
• Meanwhile, in medium bowl, mix 1 container plus 1 cup chocolate frosting with food color to make black frosting. Cut marshmallow in half crosswise.
• Using serrated knife, cut off top rounded portion of each cake to level surface. Turn cakes cut sides down. Cut cakes as shown in template (template can be found under the Tips below). Place cake pieces on tray as directed in template, attaching to tray and to each other with small amount of frosting.
• Spread thin layer of vanilla frosting over head and thin layer of black frosting over ears, body and paws to seal in crumbs. Refrigerate or freeze cake 30 to 60 minutes to set frosting.
• Frost head with some of remaining vanilla frosting. Frost rest of cake with some of remaining black frosting. To pipe on panda features, spoon vanilla and black frostings into separate resealable plastic freezer bags and cut small tip off 1 corner of each bag.
• Pipe or spread vanilla frosting on body to create chest. Pipe or spread black frosting on head for patches around eyes. Place marshmallow eyes on patches. For pupils, attach 1 mint to each marshmallow slice with frosting. Pipe or spread black frosting on snout for nose and mouth. Pipe or spread vanilla frosting on back paws to create paw prints. Pipe outline around body and front legs with black frosting. Fill in outline with additional black frosting so front legs have a thicker layer of frosting than white chest. Using metal spatula, create a different texture on the body and front legs to further define legs from chest and back paws. Store loosely covered.