How To Carve A Standing Rib Roast Recipes

STANDING RIB ROAST

Steps:

• Remove the large cut of meat from the refrigerator1 hour before putting on the grill to allow the internal temperature of the meat to come down.
• Brush the meat with oil to keep it moist and from sticking to the grates. Sprinkle generously with salt and pepper and the dried herbs. Make slits in the meat with a sharp knife and insert the garlic cloves.
• Prepare a charcoal grill for indirect grilling. The temperature inside the grill should be 300 to 325 degrees F.
• Place the meat, bone-side down, on the rack directly in the center of the grill. Cover with the lid. Grill until an instant-read thermometer registers 125 degrees F for medium-rare, 2 to 2 1/2 hours.
• Let the meat rest before carving.

STANDING RIB ROAST

Steps:

• 1. Preheat the oven to 450°F.
• 2. Make small slits in the meat with the tip of a small knife; insert the garlic slivers. Rub the meat with salt and pepper. Roast on a rack in a shallow pan for 25 minutes.
• 3. Reduce the oven temperature to 350°F and roast for 16 minutes per pound (about 1 3/4 hours), or until a meat thermometer reaches an internal temperature of 135°F to 140°F for a medium-rare center. Let rest for 15 minutes before carving.

EASY STANDING RIB ROAST

Steps:

• Preheat oven to 475 degrees F (245 degrees C).
• Brush rib roast lightly with olive oil. Rub sea salt, black pepper, and garlic into the roast. Place fatty-side up on a rack set inside a shallow pan.
• Roast in the preheated oven until browned, about 30 minutes. Reduce oven temperature to 325 degrees F (165 degrees C) and tent pan with aluminum foil. Continue cooking until an instant-read thermometer inserted into the center of the rib roast registers 140 degrees (60 degrees C), about 1 hour.
• Let rib roast stand for 10 to 20 minutes before carving.

STANDING RIB ROAST

Steps:

• Preheat oven to 325°. In a small bowl, mix the first 5 ingredients. Place roast in a roasting pan, fat side up; rub with seasoning mixture., Roast 2-1/4 to 2-3/4 hours or until meat reaches desired doneness (for medium-rare, a thermometer should read 135°; medium, 140°; medium-well, 145°). Remove roast from oven; tent with foil. Let stand 15 minutes before carving., Meanwhile, pour drippings and loosened browned bits from roasting pan into a small saucepan. Skim fat. Add beef stock to drippings; bring to a boil. Serve with roast.

STANDING RIB ROAST

Steps:

• Remove any excess fat from the roast, leaving a thin layer. In a small bowl, combine dry mustard, sugar, and Dijon mustard. Brush mixture over the fat and cut surfaces of the roast. Refrigerate for at least 2 hours or up to overnight.
• Heat oven to 450 degrees. Set the roast, rib-side down, in a heavy, shallow roasting pan. (The ribs act as a natural rack.) Using a paring knife, score the fat. Season with salt and pepper. Roast for 15 minutes. Reduce heat to 350 degrees and continue to roast, basting every 15 minutes, until it reaches a temperature of 125 degrees for medium rare on an instant-read thermometer. Remove roast to a platter. Let rest for 15 minutes before carving.
• Pour off all but 2 tablespoons of fat from the roasting pan. Set pan on stove over medium heat. Simmer until juices begin to darken, 1 to 2 minutes. Whisk in flour and cook, scraping up caramelized bits, until flour is deep golden brown, about 3 minutes. Add stock and bring to a boil, stirring until thickened. It should very lightly coat the back of a spoon. Season with salt and pepper. Strain gravy and serve with potatoes, brussels sprouts, and horseradish sauce.

CLASSIC STANDING BEEF RIB ROAST

Steps:

• Heat the oven to 325 degrees F. Season the beef with the black pepper. Place the beef into a roasting pan, rib-side down.
• Roast for 2 hours 20 minutes for medium-rare or until desired doneness. Remove the beef to a cutting board and let stand for 20 minutes.
• Spoon off any fat from the pan drippings. Stir the wine in the pan and heat over medium-high heat to a boil, stirring to scrape up any browned bits from the bottom of the pan. Reduce the heat to medium and cook for 5 minutes. Pour the wine mixture through a fine mesh sieve into a 2-quart saucepan.
• Stir the stock and flour in a medium bowl with a whisk. Gradually add the stock mixture to the saucepan, stirring with a whisk. Cook and stir over medium heat for 5 minutes or until the mixture boils and thickens. Season with additional salt and black pepper, if desired. Serve the stock mixture with the beef.

STANDING RIB ROAST

Steps:

• Pat meat all over with paper towels, then season it all over with salt and pepper. If you want to make a smoky garlic-herb paste, combine herbs, garlic, smoked paprika and just enough olive oil to make a paste. Rub all over meat. Let meat come to room temperature for 2 to 3 hours depending upon how cold it was to begin with.
• Heat oven to 450 degrees. Place meat bone-side down in a roasting pan or on a rimmed sheet pan. Roast for 20 minutes, then turn heat to 350 degrees and continue to roast until the meat registers 115 degrees on an instant-read thermometer for rare, 125 for medium rare (it will continue to cook after you pull it out of the oven). Timing depends on your oven, your pan and the shape of your roast, so start checking after the meat has been in the oven for an hour, but it could take 1 1/2 hours or even slightly longer.
• Let meat rest at room temperature for 20 minutes before carving.

TO CARVE A RIB ROAST

Steps:

• For all its grandeur, a standing rib roast is actually much simpler to carve than a turkey. Just make sure that you ask the butcher to remove the chine bone, which lies along the bottom of the cut, so that you can free the ribs easily. And before you attempt either of the following methods, freshly sharpen your carving knife! Otherwise, high drama (or farce, depending on your perspective) is likely to ensue as the roast skids off the carving board.
• The most straightforward method is to stand the roast on its base, ribs pointing up and toward you, and anchor it with a carving fork. Cut between each rib down to the board, cutting around any pieces of chine bone left by the butcher.
• The English method is a little more elegant. Cut a thin slice off one end of the roast to make a flat surface and set the roast on that end. Sticking your fork between the ribs, slice horizontally across the top, cutting each slice free of the bone. A distinct advantage to carving a roast in this manner is that you can make the slices as thin as you want. Many people prefer two or three thin slices to a slab of meat.
• Whichever carving method you choose, give yourself room to maneuver by transferring cut slices to a serving platter as you go.

HOW TO CARVE A STANDING RIB ROAST

Steps:

• Place roast, large side down, on carving board. Remove slice from the large end, so roast will stand firmly. Insert meat fork below top rib. Slice from outside of roast toward rib side.After making several slices, cut along inner side of rib bone with tip of knife. As each slice is released, slide knife under and lift to plate.From "Betty Crocker's Complete Cookbook, Everything You Need to Know to Cook Today, 9th Edition." Text Copyright 2000 General Mills, Inc. Used with permission of the publisher, Wiley Publishing, Inc. All Rights Reserved.