Quick And Easy Instant Pot Pot Roast Recipes

INSTANT POT® POT ROAST

Steps:

• Turn on a multi-functional pressure cooker (such as Instant Pot®) and select Saute function.
• Combine salt, marjoram, rosemary, garlic powder, onion powder, black pepper, and paprika in a small bowl. Rub mixture all over roast to coat all sides.
• Drizzle oil into the preheated pot. Wait 30 seconds, then place roast into the pot; do not move the meat, allowing it to sear for 3 or 4 minutes. Turn the roast and sear again, 3 to 4 minutes. Repeat until all sides are browned, about 15 minutes total.
• Add potatoes, carrots, and onion to the pot. Pour in broth and Worcestershire sauce. Close and lock the lid; set vent to sealing. Select high pressure according to manufacturer's instructions; set timer for 60 minutes for a 3-pound roast or 80 minutes for a 5-pound roast. Allow 10 to 15 minutes for pressure to build.
• Release pressure using the natural-release method according to manufacturer's instructions for 10 minutes. Release remaining pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes. Unlock and remove the lid.
• Transfer roast, potatoes, carrots, and onions to a platter for serving.

QUICK AND EASY INSTANT POT POT ROAST

Steps:

• Season the chuck roast with sea salt, black pepper, and thyme.
• Set Instant Pot to saute, add ghee or avocado oil, and sear the meat until browned.
• Turn Instant Pot off, add the broth, collagen, tomato paste, Worcestershire sauce, and coconut aminos, stirring to combine.
• Add the lid and lock it, turn the pressure release to seal, and press the meat button, making sure the time is set to 45 minutes, then do a quick release.
• Add the remaining vegetables, making sure they're covered with liquid, place the lid on and make sure the valve is switched to "seal."
• Cook for 10 more minutes and allow the pressure to naturally release for 10-15 minutes.

EASY INSTANT POT POT ROAST (TENDER AND JUICY)

Steps:

• Season all sides of the beef with a generous amount of salt (2 to 3 teaspoons) and then set aside, at room temperature, for one hour.
• Meanwhile, make a spice mixture by stirring the onion powder, garlic powder, and black pepper until blended.
• Prepare the vegetables. Peel and cut the onion into large chunks. Peel the carrots and remove the ends. Slice the carrots and celery into thick long sticks. Smash garlic cloves with the flat side of a knife and peel away the skins.
• After an hour, use paper towels to pat the beef dry on all sides (this helps the meat brown), and then rub the beef on all sides with the spice mixture. The beef should be well seasoned on all sides with the spices. (You might have some leftover.)
• Add oil to the bottom of a 6-quart Instant Pot (or electric pressure cooker). Select the "Sauté" setting and choose high heat. When the oil is hot and shimmering, add the beef. Cook until well-browned on all sides, about four minutes per side. Transfer the browned beef to a plate.
• Add the onion, carrots, celery, and garlic cloves to the pot and cook, stirring occasionally until they start to sweat and lightly brown around the edges, about 6 minutes. Transfer the vegetables to a plate.
• Pour in the broth, bouillon, and apple cider vinegar, and then use a wooden spoon to scrape up any browned bits stuck to the bottom of the pot (not doing this may result in an error while cooking at pressure).
• Turn the 'saute' function off. Place the beef back into the pot and scatter the onions, carrots, celery, and garlic around the beef. Add the rosemary, thyme, bay leaf, and baby potatoes (optional). It is okay if the liquid in the pot does not completely cover the beef and vegetables.
• Select the "Pressure Cook" or "Manual" function and cook on high pressure for 60 minutes. Note that the timer will not start until there is enough pressure inside the pot, so the timer may not start for a few minutes. If your roast is not 3 pounds, you will need to adjust the cook time. As a general rule, when cooking beef roasts in a pressure cooker, assume 20 minutes of cook time for every pound of meat.
• When the cooking time is up, do not immediately open the lid and instead let the pressure naturally release for 10 minutes. After 10 minutes, release the remaining pressure by using the quick-release button (be careful to keep your hands and face away from the venting steam).
• Taste the liquid and adjust with additional salt and pepper. Transfer the beef roast to a cutting board and gently shred to your desired size and place onto a serving platter.
• If you added them, remove the potatoes and gently mash them for serving or serve whole on the platter alongside the pot roast.
• The remaining vegetables will be very soft, if you enjoy them this way, transfer them to the serving platter. If you do not like vegetables to be so soft, you can discard them. They have already done a wonderful job of flavoring the broth and roast.
• Serve drizzled with some of the liquid left in the pot. (Or make a quick gravy.)
• To make a quick gravy with the liquid left in the pot, use a strainer to remove any bits of vegetables and herbs from the liquid. Select the "Sauté" setting and choose high heat then bring the liquid to a boil and cook until it reduces by a quarter, 1 to 2 minutes.
• Meanwhile, whisk the cornstarch and water together. When the liquid has reduced, slowly whisk in the cornstarch mixture. Continue to boil until the gravy thickens. Turn off the pressure cooker, and then season the gravy to taste with additional salt, pepper, or spices. (For a creamier gravy, add a small splash of cream.)

EASY PRESSURE COOKER POT ROAST

Steps:

• Heat oil in a pressure cooker over medium-high heat. Brown roast on all sides in the hot oil; season with pepper, seasoned salt, and onion powder.
• Pour in beef broth and Worcestershire sauce, add the quartered onion, and seal the lid. Bring the cooker up to full pressure. Reduce heat to low, maintaining full pressure, and cook for 30 minutes.
• Use the quick-release method to lower the pressure. Mix in carrots and potatoes, seal the lid again, and return the pressure cooker to the heat. Bring the cooker up to full pressure and cook for an additional 15 minutes. Use the quick-release method again and transfer the roast and vegetables to a serving dish.

INSTANT POT TEXAS ROADHOUSE POT ROAST RECIPE

Steps:

• Pour beef broth into the Instant Pot.
• Season all sides of the roast with salt, pepper and garlic powder. Place roast in the bottom of the Instant Pot.
• Add in onions, green peppers, celery, and garlic on top of and all around the roast.
• Pour tomato sauce, BBQ sauce, and Worcestershire sauce on top of roast. Then place bouillon cubes on top of roast with thyme and rosemary.
• Place the lid on top of the Instant Pot and move the valve to SEALING. Press the PRESSURE COOK (MANUAL) button and set timer for 65 minutes (or 20-25 minutes per pound, depending on the size of your roast).
• When the timer is done, let the pressure do a NATURAL RELEASE and then let the roast sit on warm for at least 1 hour (I sometimes will let it sit on warm in the Instant Pot for 3-5 hours, just to let it really get tender).
• Remove roast from Instant Pot and slice into pieces (it should pretty much fall apart by this point).
• Serve with mashed potatoes and gravy on the side and of course with Texas Roadhouse Rolls. :)