Bbq Baby Back Ribs Pressure Cooker Recipes

BEST PRESSURE COOKER STICKY BBQ RIBS EVER

Steps:

• Pour apple cider into an 8-quart multi-functional electric pressure cooker (such as Instant Pot®) to about 1/2 inch below the rack line. Stir in garlic powder, salt, paprika, and pepper. Place rack inside and heat the liquid completely; place ribs on rack.
• Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 27 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 350 degrees F (175 degrees C). Line a baking pan with a roasting rack.
• Pour about 2 cups BBQ sauce into a large cup. Add garlic, brown sugar, and chili sauce. Mix with a hand blender until completely smooth. Combine with the remaining BBQ sauce in a large bowl. Set aside to come to room temperature.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes.
• Remove ribs carefully and drain cooking liquid. Fully submerge each rib into the BBQ sauce. Place on the roasting rack so they are not touching. Brush extra BBQ sauce on top to make them extra sticky.
• Bake in the preheated oven until sauce is set, 15 to 20 minutes.

PRESSURE COOKER RIBS

Steps:

• Prepare Baby Back Ribs: Remove the membrane from the back of the ribs with a butter knife and a paper towel.
• Dry Rub Baby Back Ribs: Mix all the dry rub ingredients and rub it all over the baby back ribs. Then, set aside while you prepare other ingredients.
• Pressure Cook Baby Back Ribs: Pour the homemade BBQ sauce into the pressure cooker. Add 2 - 3 drops of liquid smoke into the BBQ sauce. Place the baby back ribs into the BBQ sauce (see tips). *Pro Tip: If your Instant Pot is very sensitive to the "Burn Error", layer the Ketchup & Dijon mustard on top of the Ribs instead of mixing it into the BBQ sauce.Close lid and Pressure Cook at High Pressure for 16 - 25 minutes. Turn off the heat and Full Natural Release. Open the lid carefully.*Pro Tip: Adjust your cooking time according to your preference: 16 minutes (tender with a bit of chew) to 25 minutes (fall off the bone).
• Preheat Oven: While the baby back ribs is cooking in the pressure cooker, preheat the oven to 450°F.
• Set Aside Baby Back Ribs: Carefully place the pressure cooked baby back ribs on a chopping board with kitchen tongs. Cover it with aluminum foil and set aside.
• Filter the Fat (Optional Step): Filter the BBQ sauce with a strainer and remove the fat with an oil separator.
• Reduce BBQ sauce: Place roughly chopped carrots into the BBQ sauce and bring your BBQ sauce to a simmer (Instant Pot: Press Sauté button once, then Adjust button to Saute Less Function).Continue to reduce and thicken the BBQ sauce by simmering until desired thickness (~6 - 8 mins). Occasionally, stir with a wooden spoon. Taste the seasoning of the BBQ sauce. Stir in more brown sugar and additional 1 - 2 drops of liquid smoke if necessary.
• Apply Sauce and Finish in Oven or Grill: Brush the homemade BBQ sauce all over the baby back ribs on all sides including the bones with a silicone basting brush. Place the baby back ribs in the oven on the top rack for 10 - 15 minutes.
• Serve and Enjoy: Serve the baby back ribs immediately with more homemade BBQ sauce along with the carrots.

BBQ BABY BACK RIBS - PRESSURE COOKER

Steps:

• Place the metal rack in your cooker and add 1/2 cup of water (I used 1 cup as the manufacturer of my electric cooker recommends).
• If your cooker is large enough you can bend the racks around in a circle. Otherwise cut into sections and stand them upright in the cooker.
• Lock the lid in place.
• Bring to 15psi (high pressure in electric cooker) and cook for 12 minutes.
• Remove from heat and use quick release method to depressurize.
• When pressure drops, carefully open lid and use long tongs to remove ribs.
• Cover with sauce by dipping in sauce in a shallow pan, or basting well as you broil or BBQ the ribs to complete.

TANGY INSTANT POT BABY BACK RIBS RECIPE BY TASTY

Steps:

• Make the dry rub: In a medium bowl, combine the brown sugar, cumin, garlic powder, onion powder, ginger, mustard powder, salt, chili powder, paprika, and red pepper flakes. Mix well with a fork.
• Place the ribs on a cutting board and generously coat on all sides with the dry rub, pressing it into the meat.
• Add the apple cider vinegar and water to the basin of the Instant Pot.
• Place the rack insert in the bottom and set the ribs on the rack on their side, spiraling around the inside of the pot. Close the lid to the Instant Pot, making sure the vent is set to sealing. Select manual pressure and set the pressure to high. Set the timer for 28 minutes. Allow natural release for 5 minutes, then set to venting to release the remaining pressure.
• While the ribs are cooking, make the barbecue sauce: In a medium bowl, combine the mustard, cayenne, salt, pepper, honey, ginger, garlic, ketchup, Worcestershire sauce, and apple cider vinegar and mix well.
• When the ribs have about 10 minutes of cooking time left, arrange an oven rack in the upper third of the oven and turn the broiler on high. Line a baking sheet with foil.
• Transfer the ribs to the prepared baking sheet. Brush liberally with the barbecue sauce.
• Broil the ribs for 2-4 minutes, until the sauce begins to caramelize.
• Remove the ribs from the oven and brush with another coat of sauce.
• Slice into individual ribs and serve immediately with the remaining barbecue sauce alongside.
• Enjoy!

INSTANT POT® BABY BACK RIBS

Steps:

• Combine kosher salt, brown sugar, chili powder, paprika, garlic powder, cayenne pepper, and black pepper in a small bowl for the spice rub.
• Cut the rack of ribs into 4 equal portions. Rub all sides of each piece with spice rub.
• Pour broth into a multi-functional pressure cooker (such as Instant Pot®). Add ribs in a teepee formation. Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 30 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 425 degrees F (220 degrees C). Line a baking sheet with aluminum foil.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes. Unlock and remove lid. Move ribs to the baking sheet using tongs. Brush ribs on all sides with barbeque sauce.
• Bake in the preheated oven for 7 minutes. Turn ribs and continue baking until meat pulls away easily from the bone, about 7 minutes more. An instant-read thermometer inserted into the center should read 145 degrees F (63 degrees C).

PRESSURE-COOKER BARBECUED BEEF RIBS

Steps:

• Select saute or browning setting on a 6-qt. electric pressure cooker and adjust for medium heat; add oil. Brown ribs in batches, adding additional oil as needed. Remove ribs. Brown onions. Add ribs back to the pressure cooker. Add water. Lock lid; close pressure-release valve. Adjust to pressure-cook on high for 40 minutes. Let pressure release naturally for 10 minutes and then quick-release any remaining pressure., In a small saucepan, combine the remaining ingredients; cook and stir over medium heat until heated through. Remove ribs from pressure cooker; discard cooking juices. Return ribs to pressure cooker. Pour sauce over top. Lock lid; close pressure-release valve. Adjust to pressure-cook on low for 5 minutes. Allow pressure to naturally release for 5 minutes and then quick-release any remaining pressure. Serve ribs with sauce.