Quick Easy Instant Pot Pot Roast Recipes

INSTANT POT POT ROAST

Steps:

• Sprinkle the chuck roast generously all over with salt and pepper. Turn a 6-quart Instant Pot® to the high saute setting. Add the oil and once hot, add the beef and cook until deeply browned on both sides, about 5 minutes per side. Remove the beef from the pot, add the tomato paste and garlic and stir to combine. Add the flour and stir to make a paste. Whisk in the red wine until well combined and bring to a boil. Cook until slightly thickened, about 3 minutes.
• Add the broth, potatoes, carrots, celery, rosemary, thyme, 1 tablespoon salt and a large pinch of pepper. Nestle the beef on top and place the onions on top or around the beef, wherever they fit best. Follow the manufacturer's guide for locking the lid and preparing to cook. Set to pressure cook on high for 1 hour 15 minutes.
• After the pressure cook cycle is complete, follow the manufacturer's guide for quick release and wait until the quick release cycle is complete. Be careful of any remaining steam and unlock and remove the lid. Allow the beef to sit in the sauce, uncovered, for 10 minutes.
• Remove the herbs from the sauce and transfer the meat to a cutting board. Slice against the grain and put on to a large rimmed serving platter. Top with the sauce and vegetables.

QUICK + EASY INSTANT POT POT ROAST

Steps:

• Set Instant Pot to sauté mode, add beef and sear for 2 to 3 minutes per side.
• Season with salt and pepper, then add garlic, Worcestershire sauce, thyme, tomato paste and beef broth.
• Top beef with potatoes and carrots.
• Cover and lock the lid in place. Place the vent to the sealing position and set to manual on high pressure for 40 minutes. When the cook time is done, allow the pressure to naturally release for 15 minutes.
• Release remaining pressure and remove the lid. Using a slotted spoon, transfer carrots and potatoes to a serving dish. Transfer pot roast to same dish and garnish with parsley.
• If a gravy is desired, set the pot to saute mode and bring cooking liquid to a simmer. Mix a tablespoon of cornstarch with 3 tablespoons of cooking liquid. Add the cornstarch mixture back to the simmering liquid; cook and stir until thickened. Spoon some of the gravy over the pot roast before serving.
• Serves: 6; Calories: 342; Total Fat: 8 grams; Saturated Fat: 3 grams; Total Carbohydrate: 19 grams; Sugars: 4 grams; Protein: 45 grams; Sodium: 538 milligrams; Cholesterol: 123 milligrams; Fiber: 4 gram.

INSTANT POT® CLASSIC POT ROAST

Steps:

• Rub beef with salt and pepper. Spray 6-quart Instant Pot® insert with cooking spray. Select SAUTE; adjust to normal. Melt butter in insert. Add beef; cook 4 to 6 minutes on first side until browned. Turn and cook 4 to 6 minutes on second side until browned. Transfer to medium bowl using tongs.
• Add onions; cook 3 to 4 minutes or until softened and beginning to brown. Stir in broth. Select CANCEL. Stir in carrots, celery, garlic and thyme. Stir in potatoes. Add beef to mixture in insert.
• Secure lid; set pressure valve to SEALING. Select MANUAL; cook on high pressure 45 minutes. Select CANCEL. Set pressure valve to VENTING to quick-release pressure.
• Remove beef to serving platter. In small bowl, beat cornstarch and water with whisk. Select SAUTE, and adjust to normal; heat liquid to simmering. Gently stir in cornstarch mixture; cook 1 to 2 minutes, stirring frequently, until thickened. Select CANCEL. Serve vegetables with beef.

QUICK AND EASY INSTANT POT POT ROAST

Steps:

• Season the chuck roast with sea salt, black pepper, and thyme.
• Set Instant Pot to saute, add ghee or avocado oil, and sear the meat until browned.
• Turn Instant Pot off, add the broth, collagen, tomato paste, Worcestershire sauce, and coconut aminos, stirring to combine.
• Add the lid and lock it, turn the pressure release to seal, and press the meat button, making sure the time is set to 45 minutes, then do a quick release.
• Add the remaining vegetables, making sure they're covered with liquid, place the lid on and make sure the valve is switched to "seal."
• Cook for 10 more minutes and allow the pressure to naturally release for 10-15 minutes.

INSTANT POT® 'POT ROAST'

Steps:

• Pat roast dry and season liberally with salt and pepper.
• Turn on a multi-functional pressure cooker (such as Instant Pot®), add oil, and select Saute function. Add roast to the hot pot and brown for 5 to 8 minutes per side. Remove to a plate.
• Add onion to the pot, adding more oil if needed, and saute until browned, 5 to 7 minutes. Add mushrooms; cook and stir until browned, 3 to 4 more minutes. Add wine and scrape up any browned bits with a wooden spoon. Stir in tomato paste, garlic, and thyme.
• Add beef broth. Place roast on top of the mushrooms and onions. Add potatoes, carrots, and celery. Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 80 minutes. Allow 5 to 10 minutes for pressure to build.
• Release pressure using the natural-release method according to manufacturer's instructions, about 15 minutes. Remove roast and vegetables to a bowl.
• Switch to Saute function. When juices begin to bubble, whisk in flour and cook to thicken, 2 to 3 minutes.

EASY INSTANT POT POT ROAST (TENDER AND JUICY)

Steps:

• Season all sides of the beef with a generous amount of salt (2 to 3 teaspoons) and then set aside, at room temperature, for one hour.
• Meanwhile, make a spice mixture by stirring the onion powder, garlic powder, and black pepper until blended.
• Prepare the vegetables. Peel and cut the onion into large chunks. Peel the carrots and remove the ends. Slice the carrots and celery into thick long sticks. Smash garlic cloves with the flat side of a knife and peel away the skins.
• After an hour, use paper towels to pat the beef dry on all sides (this helps the meat brown), and then rub the beef on all sides with the spice mixture. The beef should be well seasoned on all sides with the spices. (You might have some leftover.)
• Add oil to the bottom of a 6-quart Instant Pot (or electric pressure cooker). Select the "Sauté" setting and choose high heat. When the oil is hot and shimmering, add the beef. Cook until well-browned on all sides, about four minutes per side. Transfer the browned beef to a plate.
• Add the onion, carrots, celery, and garlic cloves to the pot and cook, stirring occasionally until they start to sweat and lightly brown around the edges, about 6 minutes. Transfer the vegetables to a plate.
• Pour in the broth, bouillon, and apple cider vinegar, and then use a wooden spoon to scrape up any browned bits stuck to the bottom of the pot (not doing this may result in an error while cooking at pressure).
• Turn the 'saute' function off. Place the beef back into the pot and scatter the onions, carrots, celery, and garlic around the beef. Add the rosemary, thyme, bay leaf, and baby potatoes (optional). It is okay if the liquid in the pot does not completely cover the beef and vegetables.
• Select the "Pressure Cook" or "Manual" function and cook on high pressure for 60 minutes. Note that the timer will not start until there is enough pressure inside the pot, so the timer may not start for a few minutes. If your roast is not 3 pounds, you will need to adjust the cook time. As a general rule, when cooking beef roasts in a pressure cooker, assume 20 minutes of cook time for every pound of meat.
• When the cooking time is up, do not immediately open the lid and instead let the pressure naturally release for 10 minutes. After 10 minutes, release the remaining pressure by using the quick-release button (be careful to keep your hands and face away from the venting steam).
• Taste the liquid and adjust with additional salt and pepper. Transfer the beef roast to a cutting board and gently shred to your desired size and place onto a serving platter.
• If you added them, remove the potatoes and gently mash them for serving or serve whole on the platter alongside the pot roast.
• The remaining vegetables will be very soft, if you enjoy them this way, transfer them to the serving platter. If you do not like vegetables to be so soft, you can discard them. They have already done a wonderful job of flavoring the broth and roast.
• Serve drizzled with some of the liquid left in the pot. (Or make a quick gravy.)
• To make a quick gravy with the liquid left in the pot, use a strainer to remove any bits of vegetables and herbs from the liquid. Select the "Sauté" setting and choose high heat then bring the liquid to a boil and cook until it reduces by a quarter, 1 to 2 minutes.
• Meanwhile, whisk the cornstarch and water together. When the liquid has reduced, slowly whisk in the cornstarch mixture. Continue to boil until the gravy thickens. Turn off the pressure cooker, and then season the gravy to taste with additional salt, pepper, or spices. (For a creamier gravy, add a small splash of cream.)

INSTANT POT® POT ROAST

Steps:

• Turn on a multi-functional pressure cooker (such as Instant Pot®) and select Saute function.
• Combine salt, marjoram, rosemary, garlic powder, onion powder, black pepper, and paprika in a small bowl. Rub mixture all over roast to coat all sides.
• Drizzle oil into the preheated pot. Wait 30 seconds, then place roast into the pot; do not move the meat, allowing it to sear for 3 or 4 minutes. Turn the roast and sear again, 3 to 4 minutes. Repeat until all sides are browned, about 15 minutes total.
• Add potatoes, carrots, and onion to the pot. Pour in broth and Worcestershire sauce. Close and lock the lid; set vent to sealing. Select high pressure according to manufacturer's instructions; set timer for 60 minutes for a 3-pound roast or 80 minutes for a 5-pound roast. Allow 10 to 15 minutes for pressure to build.
• Release pressure using the natural-release method according to manufacturer's instructions for 10 minutes. Release remaining pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes. Unlock and remove the lid.
• Transfer roast, potatoes, carrots, and onions to a platter for serving.