Burgermaster French Fries Recipes

COPYCAT BURGER AND FRIES

Steps:

• Cut potatoes in 1/2-inch wide strips. Place in a large bowl filled with warm water and soak for 20 minutes.
• Pour oil in a Dutch oven and heat over medium-high heat until it reaches 350 degrees F (175 degrees C). Line a rimmed baking sheet with paper towels and set a wire rack on top.
• Drain potatoes well and dry thoroughly with paper towels. Add 1/2 of the dried potatoes to the hot oil and cook, stirring often, until they soften slightly, about 3 minutes. Remove potatoes to the wire rack to drain. Repeat with remaining potatoes. Maintain oil temperature at 350 degrees F (175 degrees C) for finishing fries just before serving.
• Divide ground chuck into 4 portions and flatten to form 1/4-inch thick patties.
• Heat a large skillet over medium-high heat. Add burger patties to the hot skillet and cook undisturbed, until a brown crust has formed around the edges, 2 to 3 minutes. Flip, press down with a spatula to flatten, and cook for 2 more minutes. Flip again, press down once more, then top each patty with a slice of cheese; cook for 1 minute.
• While the burgers cook, spread mustard and ketchup on bottom halves of the buns. Drizzle hot sauce on the top halves of the buns, then spread mayonnaise over top. Layer with lettuce, tomato slices, pickles, and onions.
• Invert 1 patty onto a second patty so the cheese sides are touching. Repeat with remaining 2 patties. Place a stacked patty onto each top bun, and cover with a bottom bun, condiment-side down. Wrap burgers in foil.
• Return fries to the hot oil and cook until golden brown, 3 to 4 minutes. Drain on paper towels and sprinkle with salt. Serve immediately with burgers.

FRENCH FRIES

Steps:

• Peel potatoes, and cut into desired size and shape. To make thick French fries, slice potatoes lengthwise into 1/4-inch slices, and cut again into 1/4-inch strips. For shoestring potatoes, use a mandoline fitted with the fine julienne blade. Make basket-weave-style fries by fitting the mandoline with the fluted cutting blade; rotate the potato 90 degrees between each pass over the blade. Place sliced potatoes in a large nonreactive bowl, and cover with water.
• Drain potatoes, and dry thoroughly with a towel. Heat 3 to 4 inches oil in a heavy-bottomed pot over medium heat. Use a thermometer to ensure the temperature is correct: 325 degrees for French fries, 375 degrees for shoestring and basket-weave fries.
• Carefully add potatoes to oil in small batches so as not to lower the temperature of the oil. Cook shoestring and basket-weave potatoes for 2 to 3 minutes, turning occasionally. French fries need to cook for 5 to 6 minutes, turning occasionally. They will not take on much color at this point.
• Transfer to a flattened brown paper bag that has been lined with paper towels, and let cool for a few minutes or until just before ready to serve. French fries need to be fried a second time: Raise oil temperature to 375 degrees. and fry for until crisp and golden, about 1 to 2 minutes. Remove from oil, and drain again on the paper bag. Sprinkle with salt, and serve.

CLASSIC FRENCH FRIES RECIPE BY TASTY

Steps:

• Fill a large, high-walled skillet with canola oil to a depth of about ½ inch. Heat over medium-high heat until the oil temperature reaches 300°F (150°C).
• Peel the potato and cut into ½-inch (1-cm) batons. Dry the potato thoroughly with paper towels.
• Working in batches to avoid overcrowding the pan, par-fry the fries in the hot oil for about 5 minutes, or until lightly browned and tender. Use a slotted spoon to transfer the fries to a paper-towel lined baking sheet to drain. Season with salt.
• Increase the oil temperature to 375°F (190˚C).
• Return the fries to the hot oil and fry until golden brown and crispy, 3-5 minutes.
• Use a slotted spoon to transfer the fries back to the paper towel-lined baking sheet to drain. Season with salt and pepper.
• Serve immediately.
• Enjoy!